MG2000 - Analog Controller
The Faria MG2000™ system represents a breakthrough in electronic engine monitoring instrumentation. The MG2000’s are multifunction gauges with a stepper motor driven analog display for engine speed and a high resolution multi-line display providing access to all of the engine information right at you fingertips.
The Analog Controller uses the power built into the MG2000 to control a variety of switched signals. It is the ideal instrument where you need the power of a computer and the ability to connect to your engine and monitor it when you are away.
With the Analog Controller you can set your own Trip points. Protect your Generators and Pumps while you are away.
Metric values (BAR and °C) are user selectable.
- Printable Version (pdf)
-
Features:
- Trip Points are user selectable.
- Holds and displays the last 6 shut down events.
- Senses Over Temp - Stops Engine/ deactivates fuel valve
- Senses Over Speed - Stops Engine / deactivates fuel valve
- Hold Fuel Valve open for 10 Seconds on Initiation of Start button.
- Visual blinking of warning LEDs on shut down events.
- Inputs
- Oil Pressure - 240/33 Ohms
- Engine Temperature - 450/29.5 Ohms
- Low Oil Pressure Switch
- Engine Run Hours
- Engine RPM (0-3000 or 0-4000 RPM)
- Fuel Level 240/33Ohms
- Battery Voltage 0-34VDC
- Pump Pressure - 0-145 PSI with optional pressure port
- Tachometer Signal
- Alternator
- Mag Pick-up
- Spark IG (4/6/8 cyl)
- Outputs
- Starter
- Glow Plugs
- Fuel Valve
- Faria Bus discreet gauges